Description

EOTech HWS EXPS3-2 — Holographic Weapon Sight with 2-Dot BDC Reticle

The EXPS3-2 is identical to the EXPS3-0 in every way except the reticle — it features a 68 MOA ring with two 1 MOA dots for a built-in BDC hold at approximately 500m. Night vision compatible, quick-detach, side buttons, 33 ft waterproof. Made in the USA.

---

Key Features

68 MOA ring + 2 MOA dots — BDC reticle

The standard 68 MOA ring for CQB, plus a second 1 MOA dot below center that provides a holdover point for approximately 500m with .223 / 62 gr. at 2,900 fps. The two-dot layout is easily distinguishable with or without magnification — a meaningful advantage over the 4-dot reticle at standard magnification levels.

Night vision compatible

10 NV settings plus 10 daylight settings. Identical NV capability to the EXPS3-0.

Everything else matches the EXPS3-0

Same housing, same weight (11.2 oz), same QD mount, same side buttons, same 33 ft waterproof rating, same battery life, same auto-shutoff.

---

Specs at a Glance

Reticle	68 MOA ring + 2 MOA dots (BDC ~500m holdover)
Night vision	Yes — 10 NV settings
Daylight settings	10
Weight	11.2 oz
Dimensions	3.8″ × 2.3″ × 2.9″
Battery	1× CR123A (~600 hrs max / ~1,000 hrs typical)
Mount	Integrated QD lever — Picatinny
Co-witness	Lower 1/3
Buttons	Side-mounted
Waterproof	33 ft submersion
Auto-shutoff	4 hrs (daylight) / 8 hrs (NV mode)
Made in	USA

All sales are final per EOTech policy. If your item arrives damaged or defective, contact us immediately.

About the EOTech EXPS3-2 Holographic Sight

The EOTech EXPS3-2 is part of EOTech’s EXPS3 series of holographic weapon sights, designed for rapid target acquisition in close to mid-range engagements. What sets the EOTech EXPS3-2 holographic sight apart from other EXPS3 variants is its dual reticle — the standard 1 MOA dot at the center for precision aiming, surrounded by a 65 MOA ring for faster sight picture in dynamic situations. This combination gives shooters two distinct aiming points within a single optic.

Unlike traditional red dots sights that use an LED reflected off a coated lens, the EXPS3 series HWS uses laser-driven holographic technology. The reticle is projected on the same focal plane as the target, which means the sight offers parallax-free aiming at any distance and works just as well with both eyes open. The QD lever mount allows quick attachment and removal without tools, and the unit is night vision compatible — switch to the lower brightness settings and the dot reticle remains visible through Gen 2 and Gen 3 NVGs.

Common Questions

Is this EOTech sight compatible with night vision?
Yes. EOTech holographic sights are designed for NVD compatibility and have dedicated night vision settings that work with Gen 2 and Gen 3 devices including the PVS-14.

What battery does this sight use?
Most EOTech HWS models use CR123A lithium batteries. Check your specific model’s documentation for battery type and expected battery life at your preferred brightness setting.

What is the warranty on EOTech products?
EOTech offers a limited lifetime warranty against defects in materials and workmanship for the original purchaser. Contact EOTech or call us at (888) 330-7057 for warranty service questions.